Fast, efficient, which makes laser printers gives the impression. However, we only see the laser printer firm, fast side, but did not see laser printers fragile side. In actual operation and use of, if not the correct laser printers in addition to the maintenance, or can not quickly resolve the fault laser printers, laser printers will not only caused the fault, but it will also impact office efficiency. Therefore, we find that a good laser printer at the same time, we should pay attention to the laser printer maintenance and scientific fault handling. As laser printers instead of consumer products, more users for laser printers still in the wait-and-see attitude. This not only affects everyone understanding for laser printers, and laser printers in the failure of the time, that can not be quickly resolved. Based on this, the authors compiled the laser printer fault rapid processing method, you can guarantee that within 10 minutes solve your laser printer maintenance and troubleshooting problems.
Laser printer maintenance of common sense
No technology is the day to Make Therefore, even if you want to master 10 minutes rapid Advanced secret, it must master the basic laser printer product characteristics. First, you need to understand the basic structure of laser printers, laser printers can be effective troubleshooting.
Structurally, the laser printer's main component of the optical components, spare parts and cleaning up paper path components. While the visual components including paper, photosensitive drum, roll, etc. Transfer Printing. For such a high efficiency laser printers print a large number of office products, the most important thing is to do regular cleaning of laser printers, laser printers This is the basis for maintenance. First introduced laser printers below basic demolition and clean-up.
Demolition Laser Printer
Before the demolition of laser printers, laser printers first to the power is off. Charged in the state because of the demolition of laser printers, laser printers will not only cause the motherboard burned, serious users, but also endanger the security, demolition of laser printers in the first before the closure of certain power, which is very important. After the power is turned off, open the hatch laser printer, remove the drum unit. Pay attention to the drum unit in the show, not overall, but with the drum unit prominent part of the controller, parallel and pulled out the drum unit. The main reason for this is to avoid users to pull process, the dust stirred up inside the cabin to avoid inhalation of large users harmful dust. Show drum unit, then to get rid of dust internal laser printers and toner. Users can use a laser printer stained with the wet cloth for cleaning agents or soft soft cloth to clean the cabin internal, as for the internal gear and printers conductive terminal can use ethanol. Box photosensitive drum and toner dust can dust with a soft brush. In this process, make sure not to use a corrosive liquid to clean the printer, there were also hard not to use the brush sweeping photosensitive drum surface. The brush too hard scratching photosensitive drum surface, it would affect results in a flash.
Photographic Unit cleared Laser Printer
Cleaning Laser Printer is the most important part of the completion of the laser printer photosensitive drum dust. As long laser printers print in a large state, so the use of a longer time after the photosensitive drum can be a recession situation, this will lead to LPT be blurred, bottom ash, such as increasing phenomenon. When users need to clean up the photosensitive drum. This step, users can use with professional cleaning agents wipe photosensitive drum uniform direction on the surface, this process can not only help increase the tympanic membrane photosensitive photosensitive drum, and can be played clean dust effects. The photosensitive drum parts are very expensive, so in the clean-up, careful not to wipe too forcefully to prevent damage to the photosensitive drum tympanic membrane.